Beko QWIK-PURE CS Installation And Operating Manual page 57

Installation and operating manual
Image
Installation work
Description / explanation
6. Push the expansion module and the collector
together.
0 The expansion module must fully abut the
collector.
7. Insert the locking unit and push it down all the
way.
8. Position the collector on a flat surface at the
installation location.
9. Align the foot with the positioning tubes facing
downwards and position it over the assembly
opening.
10. Tilt the upper end of the foot towards the filter
cartridge holder until the positioning tubes are
vertical.
QWIK‑PURE iCS
®
57 | 132