Handling Hazardous Substances; Use Of Spare Parts, Accessories Or Materials - Beko QWIK-PURE CS Installation And Operating Manual

Installation and operating manual
• Ensure order and cleanliness during maintenance and repair work. Prevent impurities from penetrating
into the opened product or accessories. Store dismantled components and accessories directly in a safe
place.
• After completing maintenance and repair work, remove all tools and cleaning agents used, as well as all
parts that are no longer needed, from the work area.
• Only dispose of the product and accessories once they have been cleaned and are free of any residual
fluids.
• All components, assemblies, operating, auxiliary materials and cleaning agents must be disposed of
appropriately and according to regional statutory specifications and provisions.
• Dispose of electrical and electronic components through a specialized disposal company or return them
to the manufacturer.

2.5.8 Handling hazardous substances

Substances contained in the condensate that are hazardous to health and the environment can irritate and
damage the skin, eyes and mucous membranes on contact. In addition, condensate contaminated with
pollutants must not be allowed to enter the sewerage system, water bodies or the ground.
For the safe handling of polluted condensate, observe the following:
• Use suitable personal protective equipment when handling condensate.
• Collect and dispose of leaked or spilled condensate in accordance with the locally applicable legal
requirements and regulations.

2.5.9 Use of spare parts, accessories or materials

Use of incorrect spare parts, accessories, materials, auxiliary and operating materials, may result in death or
serious injury. Malfunction, device failure or material damage may occur.
• Only use undamaged original parts, auxiliary and operating materials specified by the manufacturer in
carrying out all work.
• Only use materials permitted for the specific purpose and suitable tools in proper condition.
• Only use cleaned pipelines free from dirt and corrosion.
• Only use electrical components and materials that comply with the regionally applicable legal
requirements and regulations (standards, directives, etc.) for electrical safety.
QWIK‑PURE iCS
®
13 | 132