Cleaning; Warning Notices; Cleaning Work - Beko QWIK-PURE CS Installation And Operating Manual

Installation and operating manual

10.3.5 Cleaning

10.3.5.1 Warning notices

CAUTION
NOTICE

10.3.5.2 Cleaning work

For cleaning work to be carried out, the following prerequisites must be fulfilled and the respective
preparatory tasks must have been completed.
Tool
• No tool necessary
1. The QWIK-PURE
2. The assembly unit to be cleaned has been dismantled.
3.
Bring the assembly unit to be cleaned to a washing station with an integrated oil separator.
Image
Improper cleaning and use of incorrect cleaning agents!
Improper cleaning and the use of incorrect cleaning agents could result in slight
injuries and health or property damage.
• Only use warm water to remove stubborn dirt or deposits.
• Do not use abrasive or aggressive cleaning agents or solvents that could damage
the external coating (e.g. labels, type plate, corrosion protection, etc.).
• Do not clean or operate the device with hard or pointed implements.
• Use an antistatic, damp cloth for external cleaning.
• Replace illegible product labels (pictograms, designations) promptly.
• Flush the product only with non-pressurized water.
Local hygiene regulations!
In addition to the cleaning instructions listed, any regionally applicable or company-
specific hygiene regulations must be observed.
Preconditions
• Warm water
• Cotton cloth or disposable cloth
Preparatory work
iCS has been decommissioned.
®
Material
Description / explanation
Clean measuring chamber
Flush the measuring chamber with warm water.
QWIK‑PURE
Protective equipment
To be worn at all times:
iCS
®
107 | 132