Beko QWIK-PURE CS Installation And Operating Manual page 86

QWIK‑PURE ® iCS
Image
3 sec
3 sec
3 sec
3 sec
86 | 132
3 sec
Description / explanation
2. Press and hold the Service button for 3 seconds.
0 The LED NUMBER OF FILTER CARTRIDGES
flashes green.
3. Press and hold the Service button for 3 seconds.
0 The LED NUMBER OF FILTER CARTRIDGES will
switch from the current flashing number to the
next higher number (e.g., from 1 to 2).
4. Repeat this step until the correct number of installed
filter cartridges is set.
5. Press and hold the Enter button for 3 seconds.
0 The set number of filter cartridges will be saved.
0 The LED NUMBER OF FILTER CARTRIDGES for
the set number of filter cartridges will light up
green.
0 The FILTER CARTRIDGE SELECTION status LED
will turn off.
0 The display will switch to the START MENU
screen.
Installation and operating manual