Connecting The External Power Supply - Beko QWIK-PURE CS Installation And Operating Manual

QWIK‑PURE ® iCS

7.2.1 Connecting the external power supply

Image
70 | 132
Connection work
Description / explanation
1. Plug the power supply cable's threaded
connection onto the power supply connection
and tighten the union nut clockwise hand-tight.
2. Route the power supply cable all the way to the
protective contact socket.
0 Route the cable in such a way that it is free of
any mechanical stress.
0 Prevent trip hazards by routing the cable
adequately.
3. Insert the protective contact plug into the
protective contact socket.
0 The FRC will start and the SET NUMBER OF
FILTER CARTRIDGES menu will be shown.
Installation and operating manual