Minimal Configuration Before Deploying Remote Units; Entering System Information And Setting The System Clock - Paradyne FrameSaver SLV 9124 User Manual

Configuration

Minimal Configuration Before Deploying Remote Units

Entering System Information and
Setting the System Clock
3-8
At a minimum, the following configuration options must be set before deploying a
a FrameSaver unit to a remote site:
Node IP Address
Node Subnet Mask
See Table 3-11, Node IP
Select System Information to set up or display the general SNMP name for the
unit, its location, and a contact for the unit, as well as to set the system clock.
Main Menu Control
The following information is available for viewing. Save any entries or changes.
If the selection is . . . Enter the . . .
Device Name Unique name for device identification of up to 20 characters.
System Name SNMP system name; can be up to 255 characters.
System Location System's physical location; can be up to 255 characters.
System Contact Name and how to contact the system person; can be up to
255 characters.
Date Current date in the month/day/year format (mm/dd/yyyy).
Time
Current time in the hours:minutes format (hh:mm).
NOTE:
To clear existing information, place the cursor in the Clear field ( Tab to the
Clear field ) and press Enter.
See Chapter 4, Security and Logins
March 2000
Options, for a description of these options.
System Information
, to set up and administer logins.
9124-A2-GB20-00