Applying Power To The Unit - Paradyne 6512 Installation Instructions Manual

Applying Power to the Unit

"
Procedure
After you have installed your SuperLine Adapter, use the following procedure to apply
power to the adapter.
¶
Insert the power cord's cylindrical plug into the jack labeled POWER on the
adapter rear panel.
·
Plug the transformer into an AC power outlet.
PWR ALM
Phone,
Fax Machine,
or Modem
After power is applied, the adapter performs a power-on self-test. During the power-on
self-test, all front panel indicators light for one second and then turn off. Only the PWR,
LINE, and ETHERNET (if applicable) indicators remain lit. If any other indicators remain
lit, refer to Troubleshooting Your Adapter on page 23. Refer to Front Panel Indicators
on page 7 for more information on SuperLine Adapter front panel indicators.
Congratulations, your SuperLine Adapter installation is now complete.
TST DSL ETHERNET
22
Power
99-16048a-02