Use Of Ethernet Interfaces - Siemens SINUMERIK ONE NCU 1740 Equipment Manual

Connecting

8.7 Use of Ethernet interfaces

• HLA System Manual
• S120M Equipment Manual
Additional information about the Combi is provided in:
• SINAMICS S120 Combi Equipment Manual
Additional information about HF Motor Modules and the associated components is available in:
• High Frequency Drive System Manual
You can find additional information on all of the other modules in:
• Control Units and Additional System Components Equipment Manual
8.7 Use of Ethernet interfaces
Application
The following connections can be established via the Ethernet interfaces:
• X120 provides the link to the system network (e.g. operator panels).
• X130 connects the NCU to the company network.
• X127 is used for commissioning and remote diagnostics via teleservice adapter IE.
You can find more information in the following manuals:
– SINUMERIK ONE Commissioning Manual Basic Software and Operating Software
– SIMATIC TS Adapter IE Manual
Properties
The interfaces are full duplex 10/100/1000 Mbit Ethernet ports. The ports are connected as an
Ethernet end device.
72
Equipment Manual, 09/2022, A5E51087503B AC
NCU 1740