141: Magnetic Character Set; 143: Host-Loadable Printer Authorization Matrix; 145: 3289 Print Control; 147: Local-Copy Function - IBM 3270 Manual

141: Magnetic Character Set
Enter one of the following to specify the magnetic character set installed:
A= None
B = Numeric (3277-compatible)
C = Alphanumeric (auto entry for secure data)
D = Alphanumeric (auto entry for all data)
143: Host-Loadable Printer Authorization Matrix
Enter a 0 if a printer authorization matrix is not to be loaded from the host;
enter a 1 if it is.
This matrix is defined by a user-written application program. When run, a
host-loaded matrix overrides any other printer authorization matrix. (See
also sequence number 021.)
145: 3289 Print Control
\
u
Enter a 1 if a 3289 Line Printer with the text print belt (feature 9496) is
attached. Enter a 0 if no 3289 Line Printer is attached or if a 3289 without
the text print belt is attached.
1
0
147: Local-Copy Function
3-46
BSC: Enter a 1 if the local-copy function Print key is being used; enter a 0
if it is not.
Distributed Function Terminal: If you want to use the local-copy
function on a distributed function terminal, enter a 1 and specify a printer
authorization matrix (see Appendix C).
Note: If a 0 is entered, local copy by means of the Print key and the host
Copy command are nullified.
If an IBM 3270 Personal Computer Attachment is configured (sequence
number 114=1), you must respond to 147 with a 1.
SDLC: Enter a 1 for this sequence number in step 8 on the Initial
Customizing Procedure Form. This function is not selectable for SDLC and
is automatically included in your configuration.