IV
•
Appendix C, "Printer Authorization Matrix," describes the printer
authorization matrix and how to define it. You will need to refer to this
appendix if you wish to use this function.
•
Appendix D, "Subsystem Verification Procedure," describes a procedure
for verifying the 3274 subsystem after initial microcode load (IML) is
performed.
•
Appendix E, "Color Convergence Procedure," describes a procedure for
converging the color patterns on the 3279 Color Display Station during
customizing.
•
Appendix F, "3274 Communication Cables," provides cabling
information for Models lC, 21C, 31C, and 51C and shows adapters for
modem connections.
•
Appendix G, "Planning for 3274 Model 31C Modem Addre$S Switch
Settings," tells you how to set the Modem Address switches if you have
a 3274 Model 31C with an integrated modem.
•
Appendix H, "Planning for 3274 Model 51C Switch Settings," tells you
how to set the Transmit Level, Line Speed, or Modem Address switches
if you have a 3274 Model 51C.
•
Appendix I, "3274 Control Storage Requirements," explains how to
determine control storage requirements for each model of the 3274.
•
Appendix J, "Multiple Interactive Screen Definition-Sequence Number
171," explains how to identify multiple interactive screens using
sequence number 171.
•
Appendix K, "Response Time Monitor Customizing Information,"
provides background information and the sequence number 128
description needed to install the response time monitor (RTM) function.
•
Appendix L, "Alert Function Customizing Information (Sequence
Number 220)," provides the background information needed to install
the alert function.
•
Appendix M, "Keyboard Layouts for Sequence Numbers 131through135
and 166," contains the keyboard diagrams referred to in Chapter 3 for
these sequence numbers.
Following the appendixes are a list of abbreviations used in this manual
and an index.