IBM 3270 Manual page 88

(I'
112: Number of Category A Terminals
\U
;f \
\L)
Models IC, 21C, and 31C: Enter a 2-digit number (08 to 32) specifying the
number of Category A tetminals that it is possible to attach to your 3274.
(The actual number you have attached at any given time may be smaller
than this number.) See Note 1.
Notes:
1. If any distributed function terminals are to be configured for multiple
interactive screens, it is recommended that you specify the actual number
of Category A devices to be attached, rather than multiples of 8. (See
Note 4.)
2. A 2-digit number must be entered. If necessary, use a leading zero; for
example, to specify
8,
enter 08.
3. Category A terminals:
3178 Models Cl,
C2, and C3
3179 in 3279-emulation mode
3180 Model 1 in 3278-emulation mode
3230 Model 2
3262 Models 3 dnd 13
3268 Model 2
IBM 3270 .Personal Computer in DFT mode
3278 Models 1, 2, 3, 4, dnd.5
3278 Models 1- 5 with IBM 3270 Personal Computer Attachment
3279 Models 2A; 2B; 3A, and 3B
I
t
3287 Models 1 and 2 with 3274/3276 Attachment (feature 8331)
3287 Models 1 C and 2C
3289 Models 1 and 2
3290 Information Panel
5210 Models
GOl
and 002
6580 Displaywriter System
Category B terminais:
IBM Personal Computer XT/370
3277 Models 1 and 2
3284 Models 1 and 2
3286 Models 1 and 2
3287 Models 1 and 2 with 3271/3272 Attachment (feature 8330)
3288 Model 2
4. Specify the number of Category A terminals in multiples of 8 (maximum
of 32) and the number of Category B terminals in multiples of 4
(maximum of 16), unless the sum of the two categories exceeds 32. See
Note 1.
Chapter 3. Preparing to Customize
3-39