114: Ibm 3270 Personal Computer Attachment; Only); 121: Keyboard Language/Character Set I/O Interface Code; 127: Response Time Monitor (Rtm) Definition (Configuration Support C Only) - IBM 3270 Manual

114: IBM 3270 Personal Computer Attachment (Configuration Support C
Only)
Enter a 1 if an IBM 3270 Personal Computer Attachment will be attached to
a display station connected to your 3274 and you intend to transfer data
between the IBM 3270 Personal Computer Attachment and the host; enter a
0 if not.
Note: If you answer 114 with a 1, you must answer sequence number!:! 147
(Local-Copy Function) anq 162 (Structured Field and Attribute
ProceS,~ing)
with a 1.
121: Keyboard Language/Character Set I/0 Interface
Cod~
Enter a 2-digit number (01 to 32) from Figure 3-7 specifying the keyboard
language and character set I/O interface code being used. A 2-digit number
must be entered. If necessary, use a leading zero; for example, to specify 7,
enter 07. ' .
127: Response Time Monitor (RTM) Defin~tion (Configuration Support C
Only)
3-42
A two-digit response is required. J3oth
di~its
must be either zero or a
nonzero value as follows:
First Digit:
0 - RTM support not wanted.
1 - RTM without host support. The RTM log and Last Transaction Time
Indicator are displayed and reset on port O* only.
2 - RTM without host support. The. RTM log and Last Transaction Time
Indicator are displayed apd reset on all ports.*
3 - RTM with host support. The RTM: log and Lfist Transaction Time
Indicator are not displayable or
resettabl~
on any local port.*
4 - RTM with host support. The :ij.TM log and Last Transaction Time
l:q.dicator are displayable on port O* only.·
5 - RTM with host support. The RTM log and Last Transaction Time
Jndicator are displayable on an ports.*
* All terminals can display the Last Transaction Time Indicator, but only
non-distributed function terminals can display the RTM log.
Note: Responses 3, 4, and 5 are applicable to SDLC networks only.
I\_/
\
v