IBM 3270 Manual page 152

\
)
~
Printer Authorization Matri·x Form
1~ r~~ponse
io
sequence number 022, enter the characters (below) supplied by the planner
in the appropriate groups on your display screen. If a group already is displayed as
AA M XXXX YYYY YYYY, your entry will overwrite these characters. When you have
completed all yburentries, move the cursor to the zero after sequence number 901 at
the bottom.of the screen, change it to a 1, and press ENTER. Any entry that is not valid
wit.I be intensified at this time and the 1 you entered will change back to a O (zero). Cor-
rect the invalid entry, and return to 901. Again, change the zero to a 1, and press
ENTER. When all entries are valid, the printer authorization matrix display will be
replaced by the next customizing sequence number. (If, at any time during this proce-
dure, you wish to cancel any entries you have just made, change the 0 (zero) after the 901
to A and press ENTER.) Return to your original instructions.
To delete an entry, move the cursor (with cursor-move keys or tab key) to the leftmost
position of the entry (the Printer Port Address) and press the spacebar twice. The entire
matrix, or as many entries as desired, can be deleted in this manner. After all changes
have been made, press ENTER. All deleted entries will be displayed as AA M XXXX
YYYY YYYY. When the matrix is satisfactorily defined, move the cursor to the zero
after sequence number 901, change it to a 1, and press ENTER.
Printer
Printer
Source
Port Printer
Class
Device
Address Mode
Assignment
List
,._.,...__
,._.,...__
A A
M
x x x x
y y y y y y y y
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
Chapter 5. Modification Procedure
5-19