IBM 3270 Manual page 280

~I
I
\_,)
Sequence Number 128 Procedures
The customization planner will have entered a checkmark by the procedure
to be followed.
_ • Default values. Change the 0 after 904 to a 1 and press ENTER.
- - • Procedure A. No host communication. Enter the values shown below in
the 8 fields.
128
81 - -
82-_
83-_
84~_
·--·
·--·
After entering the values shown, change the 0 after 904 to a 1 and press
ENTER. If the entries are acceptable, the screen clears. If the entries are
not acceptable, the incorrect entries are highlighted and an operator code is
displayed at top center of the panel. See Figure 4-4.
_ _ • Procedure 8. Host Communication. Enter the values shown below in the
F 1 and 8 fields.
128
F1- _ _ _ _ _ _ _ _
81 - -
82-_
83-_
84-_
After entering the values shown, change the 0 after 904 to a 1 and press
ENTER. If the entries are acceptable, the screen clears. If the entries are
not acceptable, the incorrect entries are highlighted and an operator code is
displayed at top center of the panel. See Figure
4-4.
Appendix K. Response Time Monitor (RTM) Customizing Information
K-7