022: Printer Authorization Matrix Definition; 031: Number Of Rpq Diskettes Required; Only); 111: Number Of Category B Terminals (Configuration Support A, B, And C Only) - IBM 3270 Manual

022: Printer Authorization Matrix Definition
The printer authorization matrix is defined in sequence number 022. See
Appendix C for detailed information on responding to sequence number 022.
Fill in the appropriate spaces on the Printer Authorization Matrix Form
with a definition for each printer in your configuration, and attach it to the
Initial Customizing Procedure Form. The definitions may be entered in any
sequence. Also, definitions do not have to be entered successively; for
example, you may enter definitions in groups 1, 2, and 3 of the form, skip
groups 4 and 5, and continue at group 6.
Once a printer authorization matrix has been defined, sequence number 021
is no longer displayed when a customized 3274 Control Unit is being
updated. Instead, the defined matrix is displayed. If the entire matrix is
deleted, sequence number 021 is again displayed during each updating
procedure until a new matrix is defined. Any time the initial customizing
procedure is performed, the sequence number 021 is displayed and the
printer authorization matrix must be redefined if it is still required.
031: Number of RPQ Diskettes Required
Enter the number of RPQ diskettes required (0, 1, 2, or 3) in step 7 on the
Initial Customizing Procedure Form.
032:
Request RPQ Parameter List (Configuration Support C and T Only)
Enter a 1 if you require the RPQ parameter list; enter a 0 if not. If you
enter a 1 here, sequence number 033 (RPQ Parameters) is displayed, with
spaces for parameter information. If you enter a 0, sequence number 033 is
not displayed.
Note: An RPQ parameter list is required by certain RPQs. Specific
information about this list, sequence number 033 format, and
implementation is supplied with the RPQ.
111: Number of Category B Terminals (Configuration Support A, B, and C
Only)
3-20
Enter a 2-digit number (00 to 16) specifying the number of Category B
terminals that it is possible to attach to your 3274. (The actual number you
have attached at any given time may be smaller than this number.) See
sequence number 112 for a description of category types.
Notes:
1. Specify the number of Category B terminals in multiples of 4 (maximum
of 16).
2. A 2-digit number must be entered. If necessary, use a leading zero; for
example, to specify 4, enter 04.