Mif+Inp-Input Source; Mif+Hfq-H-Sync Freq; Mif+Vfq-V-Sync Freq - Christie APS Series Technical Reference

Examples
Reset the projector:
REST
MIF+INP–Input Source
Gets the information of the input source.
Commands
Command Description
MIF+INP Gets the input source
Examples
Get the input source:
MIF+LPT
Result:
HDMI1
MIF+HFQ–H-sync freq.
Gets the information of the H-sync freq.
Commands
Command Description
MIF+HFQ Gets the V-sync freq.
Examples
Get the H-sync freq:
MIF+LPT
Result:
74.12KHz
MIF+VFQ–V-sync freq.
Gets the information of the V-sync freq.
APS Series Technical Reference
020-103593-01 Rev. 1 (07-2022)
Copyright 2022 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Serial API commands
Value
—
Value
—
32