Setting The Size Of Second Input Source; Setting Up The Display Layout With Two Input Sources; Input Sources Layout And Size - Christie D13WU2-HS User Manual

Setting the size of second input source

Set the size of picture in picture (PIP)/picture by picture (PBP). See
on page 59 for further details of the layout and size.
1. Select Menu > Input Switching & PIP > Size.
2. Select the appropriate size, small, medium or large, for PIP/PBP input source.
3. To confirm the selection, press ENTER.
Setting up the display layout with two input
sources
Set the display location for main input source and second input source on the screen. See
sources layout and size
1. Select Menu > Input Switching & PIP > Main Layout.
2. Select the appropriate layout.
3. To confirm the selection, press ENTER.

Input sources layout and size

A P indicates the primary source region (lighter color) and an asterisk (*) indicates both regions are
the same size.
PIP/PBP Layout
PBP, Main Left
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
PIP, Bottom Right
PIP, Bottom Left
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
on page 59 for further details of the layout and size.
PIP/PBP Size
Small Medium
P
P
P
P
P
P
Input sources layout and size
Large
*
P P
*
P
P
*
P P
*
P
P
P P
P P
Configuring input settings
Input
59