Installation and setup
Learn how to install, connect, and optimize the projector display.
Site requirements
To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.
Physical environment
Understand the physical environment requirements that apply to all Christie Eclipse components.
Notice. If not avoided, the following could result in property damage.
•
Do not install any portion of the fiber bundle next to a heat source.
The physical environment must meet the following requirements:
Physical operating environment
Minimum ambient temperature
Maximum ambient temperature
Humidity
Physical non-operating environment
Minimum ambient temperature
Maximum ambient temperature
Humidity
Altitude
For information on the physical environment requirements for the laser unit and chiller unit, refer to the
product documentation provided by the equipment manufacturer.
Power requirements
Learn the power requirements for the projector.
Item
Voltage
Current rating
Christie Eclipse Installation and Setup Guide
020-103331-01 Rev. 1 (04-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Projector head
10°C (50°F)
30°C (86°F)
20% to 60%
-20°C (-4°F)
65°C (149°F)
20% to 60%
0 to 3000 meters (0 to 9842.5 feet)
Description
200-240 VAC single phase
5 A
Laser module
10°C (50°F)
25°C (77°F)
—
-20°C (-4°F)
60°C (140°F)
—
—
20