HPE ProLiant MicroServer Gen10 Plus v2 User Manual page 59

Hide thumbs Also See for ProLiant MicroServer Gen10 Plus v2:

Table of Contents

External HPE RDX Backup System option

To install a simple, inexpensive, and reliable way to securely store your data backups, install an external HPE RDX Backup System. The

backup system is a removable, ruggedized, hard disk drive system.

The backup system consists of two components:

RDX cartridge

RDX docking station

Hewlett Packard Enterprise recommends that no more than one HPE RDX Removable Disk Backup System be connected to a system at a

time.

For more information on installing and configuring the external HPE RDX Removable Disk Backup System, see the RDX product

documentation:

https://www.hpe.com/info/rdx

iLO enablement option

The server base configuration supports in-band communication for accessing iLO. The iLO enablement option comes preinstalled with an

iLO Essentials license. The remote iLO access feature is activated after the iLO enablement module is installed.

Subtopics

Installing the iLO enablement option

Installing the

iLO enablement option

Prerequisites

CAUTION:

CAUTION: A discharge of static electricity from a finger or other conductor might damage system boards or other static-

sensitive devices. To prevent damage, observe antistatic precautions.

Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.

Procedure

1. Power down the server.

2. Disconnect the power cord from the AC source.

3. Remove the power adapter cord from the power cord clamp, and then disconnect the power adapter from the server.

4. Disconnect all peripheral cables from the server.

5. If installed, unlock and remove the security padlock and/or the Kensington security lock.

For more information, see the lock documentation.

6. If the server is in a vertical orientation, position the server in a horizontal orientation.

HPE ProLiant MicroServer Gen10 Plus v2 User Guide

Table of Contents