HPE ProLiant MicroServer Gen10 Plus v2 User Manual page 4

Installing the front bezel
Power up the server
Hardware options installation
Server data backup
Hardware option installation guidelines
Drive support information
Drive installation guidelines
Installing an LFF drive
Installing an SFF drive
Memory option
Memory population rules
DIMM installation guidelines
Installing a DIMM
Storage controller options
Preparing the server for storage controller installation
Installing a type-p PCIe plug-in controller option
Expansion card options
Installing an expansion card
Remove the air baffle from an expansion card
Install a low-profile bracket on an expansion card
Internal USB device option
Install an internal USB device
External HPE RDX Backup System option
iLO enablement option
Installing the iLO enablement option
Cabling
Cabling guidelines
Storage cabling
Four-bay drive cabling: Onboard SATA controller cabling
Four-bay drive cabling: Type-p controller cabling
Fan cabling
Configuration resources
Updating firmware or system ROM
Configuring the server
Configuring storage controllers
Deploying an OS
Configuring security
Optimizing the server
Server management
Managing Linux-based high performance compute clusters
Troubleshooting