HPE ProLiant MicroServer Gen10 Plus v2 User Manual page 17

Hide thumbs Also See for ProLiant MicroServer Gen10 Plus v2:

Table of Contents

When using the Microsoft Windows BitLocker Drive Encryption feature, always retain the recovery key or password. The recovery key or

password is required to enter Recovery Mode after BitLocker detects a possible compromise of system integrity.

HPE is not liable for blocked data access caused by improper TPM use. For operating instructions, see the documentation for the

encryption technology feature provided by the operating system.

BitLocker recovery key/password retention guidelines

The recovery key/password is generated during BitLocker setup, and can be saved and printed after BitLocker is enabled. When using

BitLocker, always retain the recovery key/password. The recovery key/password is required to enter Recovery Mode after BitLocker detects

a possible compromise of system integrity.

To help ensure maximum security, observe the following guidelines when retaining the recovery key/password:

Always store the recovery key/password in multiple locations.

Always store copies of the recovery key/password away from the server.

Do not save the recovery key/password on an encrypted drive.

Setup

This chapter describes general operational requirements and safety reminders, as well the initial setup procedure for the server.

Subtopics

Initial system installation

Server orientation options

Operational requirements

Server warnings and cautions

Electrostatic discharge

Initial system installation

Depending on your technical expertise and the complexity of the product, for the initial system installation, select one of the following

options:

Ordering the HPE Installation Service

Setting up the server

Subtopics

HPE Installation Service

Setting up the server

HPE Installation Service

HPE

Installation Service

HPE ProLiant MicroServer Gen10 Plus v2 User Guide

Table of Contents