HPE ProLiant MicroServer Gen10 Plus v2 User Manual page 60
Hide thumbs
Also See for ProLiant MicroServer Gen10 Plus v2:
- User manual (89 pages) ,
- Product end-of-life disassembly instructions (5 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
7. Remove the chassis cover .
8. Remove the system board assembly .
9. Remove the iLO enablement module blank.
Retain the blank for future use.
10. Install the iLO enablement module (callout 1), and then install the screw on the rear panel (callout 2). Make sure that the module is
firmly seated in the slot.
HPE ProLiant MicroServer Gen10 Plus v2 User Guide
60
Advertisement
Table of Contents
