HPE ProLiant MicroServer Gen10 Plus v2 User Manual page 9

Item Item Component Component
1 Padlock eye
2 iLO dedicated network port
3 Kensington security slot
4 USB 3.2 Gen 1 Type-A ports
5 USB 2.0 port
6 DisplayPort 1.1a
7 VGA port
8 1 Gb RJ45 port 4
9 1 Gb RJ45 port 3
10 1 Gb RJ45 port 2
11 1 Gb RJ45 port 1/iLO shared network port To connect the server to a wired network, connect a standard Ethernet cable here.
12 Power jack
13 PCIe4 x16 expansion slot
These ports are also known as SuperSpeed USB 5 Gb/s ports. The appropriate cable and compatible hardware are required to take
1
advantage of the 5 Gb/s data transfer speed.
Subtopics Subtopics
Display device setup Display device setup
Display device setup Display device setup
Description Description
To lock the chassis cover and prevent access to the internal components, attach a
padlock here.
To connect iLO to a dedicated management network, connect a standard Ethernet
cable here. This port requires the installation of the iLO enablement option.
To secure the server to a heavy or immovable object, connect an antitheft security
cable here.
1
Connect USB devices. These ports are backwards compatible with earlier USB
Type-A version devices.
Connects to a high-resolution digital display device.
Connects to an analog display device.
To connect the server to a wired network, connect a standard Ethernet cable here.
When the iLO enablement option is installed, this port can be configured to handle
both server network and iLO network traffic.
Connects the power cord.
Connects a half-height, half-length (low-profile) PCIe4 expansion card option.
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 9