HPE ProLiant MicroServer Gen10 Plus v2 User Manual page 58

7. Remove the chassis cover .
8. Plug in the USB device into the internal USB port.
9. Install the chassis cover .
10. If removed, install the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
11. Connect all peripheral cables to the server.
12. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clamp.
13. Connect the power cord to the AC source.
14. Power up the server .
Results Results
The installation is complete.
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 58