Dimm Label Identification - HPE ProLiant MicroServer Gen10 Plus v2 User Manual

Position Position Default Default Function Function
1
S1 Off
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
1
S5 Off
1 , 2 3
S6 Off
S7 Off Reserved
S8 Off Reserved
S9 Off Reserved
S10 Off Reserved
S11 Off Reserved
S12 Off Reserved
To access the redundant ROM, set S1, S5, and S6 to On.
1
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings
2
to their manufacturing defaults.
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
3
restored. For more information, see Configuring the server.

DIMM label identification

DIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the label to locate
specific information about the DIMM.
For more information about product features, specifications, options, configurations, and compatibility, see the HPE DDR4 SmartMemory
QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/support/DDR4SmartMemoryQS
Off—iLO 5 security is enabled.
On—iLO 5 security is disabled.
Off—Power-on password is enabled.
On—Power-on password is disabled.
Off—No function
On—Restore default manufacturing settings
https://www.hpe.com/support/DDR4SmartMemoryQS).
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 12