HPE ProLiant MicroServer Gen10 Plus v2 User Manual page 36
Hide thumbs
Also See for ProLiant MicroServer Gen10 Plus v2:
- User manual (89 pages) ,
- Product end-of-life disassembly instructions (5 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
1. Make sure that the bezel locks are in the unlocked position.
2. Install the front bezel:
a. Insert the bezel tabs to their chassis openings (callout 1).
b. Pivot the bottom part of the bezel downward (callout 2).
3. If you prefer to secure the bezel to the chassis, switch the bezel locks downward.
HPE ProLiant MicroServer Gen10 Plus v2 User Guide
36
Advertisement
Table of Contents
