Removing The Chassis Cover - HPE ProLiant MicroServer Gen10 Plus v2 User Manual

Removing the chassis cover

Removing the chassis cover
About this task About this task
To access the front bezel locks, remove the chassis cover.
Procedure Procedure
1. Power down the server.
2. Disconnect the power cord from the AC source.
3. Remove the power adapter cord from the power cord clamp, and then disconnect the power adapter from the server.
4. Disconnect all peripheral cables from the server.
5. If installed, unlock and remove the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
6. If the server is in a vertical orientation, position the server in a horizontal orientation.
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 30