Front Panel Leds And Button - HPE ProLiant MicroServer Gen10 Plus v2 User Manual

Item Item Component Component
1 Drive bays (4, behind the front bezel)
2 Front bezel
3 USB 3.2 Gen 2 Type-A ports
These ports are also known as SuperSpeed USB 10 Gb/s ports. The appropriate cable and compatible hardware are required to take
1
advantage of the 10 Gb/s data transfer speed.

Front panel LEDs and button

Front panel LEDs and button
Item Item Description Description
1 Drive activity LED
2 NIC status LED
3
3 Health LED
4 Power on/Standby button and
system power LED
Description Description
The drive bays support 3.5-inch LFF SATA drives.
To support 2.5-inch SFF drives, install the LFF-to-SFF drive converter option.
To access the drive bays, remove this bezel.
1
Connect USB devices. These ports are backwards compatible with earlier USB
Type-A version devices.
Status Status
1
Flashing green
Off
2 3
Solid green
Flashing green
Off
Solid green
Flashing green
Flashing amber
Flashing red
Solid green
3
Flashing green
Amber
Off
Definition Definition
Ongoing drive activity
No drive activity
Linked to network
Network active
No network activity
Normal
iLO is rebooting
4
System degraded
4
System critical
System on and normal operation
Performing power-on sequence
System in standby
5
No power present
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 7