System Maintenance Switch Descriptions - HPE ProLiant MicroServer Gen10 Plus v2 User Manual

Item Item Component Component
1 CMOS header
2 Fan connector
3 Riser connector
4 System maintenance switch
5 SATA 6GB/s port
6 Drive sideband connector
7 Drive power connector
8 System battery
9 DIMM slot 1B
10 DIMM slot 2A
11 Internal USB 3.2 Gen 1 port
Subtopics Subtopics

System maintenance switch descriptions

System maintenance switch descriptions
DIMM label identification DIMM label identification
System maintenance switch descriptions System maintenance switch descriptions
Description Description
Use this header to clear the CMOS and reset the BIOS settings to their factory default
values.
Connects the fan cable.
Connects the system riser board .
Use this switch to physically configure various server settings.
Connects the drive SATA cable.
Connects the drive sideband signal cable.
Connects the drive power cable.
This battery provides power to the server CMOS and real-time clock.
These slots support standard UDIMMs with ECC. When installing a single UDIMM only,
install it in the DIMM slot 2A.
Connect a USB device, such as a USB security key or a USB drive key, intended for
permanent use. The internal connection avoids issues of clearance on the front or rear of
the server and prevents physical access to secure data.
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 11