Switching Roll Unit Modes - Canon imagePROGRAF GP-4000 Online Manual

Switching Roll Unit Modes

Before using the roll unit, follow these steps to select the mode you want to use.
Important
• After switching the roll unit function, you must use a separate computer to apply the roll unit settings to •
the printer driver. For details, see "Reflect Roll Unit Settings in the Printer Driver" (Windows) or
Roll Unit Settings in the Printer
• • If you change the roll unit from a take-up device to a feed device, first cut the paper that has been taken
up.
1. Tap paper settings display area on Home screen of touch screen. 1.
Important
• If the Home screen does not appear, tap the HOME button.
•
2. 2. Tap
or
3. Change function of roll unit. 3.
• Using as feed device
•
1. Tap Roll unit use settings.
1.
2. Tap ON when message confirming roll unit's change to feed mode appears.
2.
Driver" (macOS).
area.
165
"Reflect