Feeding Roll Paper Manually - Canon TZ-5300 Online Manual

Feeding Roll Paper Manually

After feeding the roll paper, you can move it forward and back.
Important
• If the leading edge of the paper protrudes forward from its original position by using this function, you •
may not be able to switch the output location. If you cannot switch the output location, cut the paper
before switching the output location.
Paper cutting (to have the roll cut at your specified position)
• • Do not manually feed rolls to increase the margins at the edge of the printed document. If you need to
increase the margin, add a margin to the tip of the image in the printing direction when printing.
• If turning off the power while the paper protrudes forward from its original position, you will not be able •
to remove the paper. Turn off the power after removing the paper.
If you turn off the power before removing the paper, turn it on before removing the paper. Also, in this
case, the paper may be scratched.
1. Tap paper settings display area on Home screen of touch screen. 1.
Note
• • If the Home screen does not appear, tap the HOME button.
2. Tap 2. or
3. Tap Feed/cut. 3.
4. 4. Tap or touch Advance and Rewind to move roll paper forward or back.
Note
• • Tapping Advance or Rewind moves the roll paper approximately 0.04 inch (1 mm).
Touching Advance or Rewind moves the roll paper until you release the key. If "Cannot advance
the paper any further." appears on the touch screen, release the key.
area.
127