Page Processing - Canon TX-3000 Online Manual

Page Processing

You can configure advanced settings for printing on roll paper and adjust how much of the document
extends outside the paper when printing borderless.
Roll Paper Width
Select the roll paper width.
Select the width that matches the width of the roll paper loaded in the printer.
Banner Printing
Select this check box to print documents extending over several pages as one continuous document
without any spaces between the pages.
Automatic Cutting
You can set whether to have the paper cut automatically or to have cut lines printed on the paper
The following settings can be configured for automatic cutting
Printer Default
Applies the settings configured in the control panel of the printer unit.
None
After printing is over, the printer goes on to print the next set of data without cutting the paper into
individual pages.
Print Cut Guideline
After printing is over, the printer prints cutting lines on each page and goes on to print the next set
of data.
Fit Roll Paper Width
The printer automatically expands or reduces the document to match the roll paper width and then
prints the document.
Off
The document is printed as-is without being expanded or reduced.
651