Table of Contents
Advertisement
1
Fig. Drum, vibration side
1. Drain plug
Fig. Drum gear
1. Drain plug
2. Ventilating plug
2021-03-16
Drum - Oil change
Set the roller so that the drain plug (1), the large plug,
is at the lowest position in its rotation.
Place a receptacle that holds at least 20 liters (5.3 gal)
under the drain plug.
Remove the drain plug (1). Allow all the oil to drain out
and refit the plug.
See under the heading 'Every 500 hours of operation'
for filling oil.
Drum gear - Oil change
Place the roller on a level surface.
Wipe clean, unscrew the plugs (1, 2) and drain the oil
into a suitable receptacle, capacity about 2 liters (0.5
gal.).
2
1
4812159701_D.pdf
Maintenance - 2000h
Take great care when draining the fluid. Wear
Take great care when draining the fluid. Wear
protective gloves and goggles.
protective gloves and goggles.
Deliver the drain oil to environmentally correct
Deliver the drain oil to environmentally correct
handling.
handling.
2
1
Fig. Drum gear
147
Advertisement
Table of Contents
