Section 5
MAINTENANCE
Change the oil in the drum drive gear
Only dh and Pdh machines
Fig. 133
Move the drum, until the drain and level inspection
plug 2 (Fig. 133) is in bottom position.
Clean and unscrew the oil filler plug (1) as well as the
drain and level inspection plug.
Environment
Catch running out oil�
Fig. 134
Once all oil has been drained off move the
•
drum, until the oil filler plug 2 (Fig. 134) is in top
position and the drain and level inspection plug
(1) is in horizontal position.
Fill in oil, until it starts to run out through the
•
level inspection bore.
5-32
For quality and quantity of oil refer to the table of
fuels and lubricants�
Turn filler plug (2) and drain and level inspection
•
plug (1) tightly back in.
4-2012