Drum - Oil Change; Control - Lubrication - Fayat Group DYNAPAC CA25 Instruction Manual

Fig. Drum, left side
1. Filling plug
Fig. Cylinder, left side
1. Refill plug
2. Drain plug
3. Level glass
Fig. Forward/reverse control
2. Screws
10-03-2022
Maintenance – Planned maintenance

Drum - Oil change

Place the machine on a level surface so that the filling
plug (1) is perpendicular.
Place a receptacle with a capacity of about 5 litres
underneath the drain plug (2).
Take great care when draining fluid and oil at high
temperatures. Wear protective gloves and goggles.
Collect the oil and dispose in an appropriate manner.
Clean and unscrew the filler plug (1) and the drain plug
(2).
Allow all the oil to drain out. Fill with new lubricating oil.
Refer to the lubricant specifications for grade
information.
Controls – Lubrication
Lubricate the forward/reverse throttle mechanism.
Remove the external cover at the bottom of the seat by
loosening the screws (2). Lubricate the drive elements.
4812330982EN 107