Electrical System (Version 1); Fuse Boxes In Main Switchbox - Fayat Group DYNAPAC CC224C Instruction Manual

2
3
1
Fig. Main electrical central
1. Control unit (ECU)
2. Fuses
3. Main relay
Fig. Fuse box
Fuse box (F1) Fuse box (F1)
Main relay (F1.1) Main relay (F1.1)
1. 1.
Supply, Main ECU, I/O unit, Display Supply, Main ECU, I/O unit, Display
2. 2.
(F1.2) (F1.2)
Power group 1, Main ECU (F1.3) Power group 1, Main ECU (F1.3)
3. 3.
Power group 2, Main ECU (F1.4) Power group 2, Main ECU (F1.4)
4. 4.
Fuse box (F2) Fuse box (F2)
1. 1.
DCA Asphalt (F2.2) DCA Asphalt (F2.2)
2. 2.
3. 3.
4. 4.
54

Electrical system (version 1)

The machine's main switchbox (1) is located on the
rear of the operator platform. There is a plastic cover
over the distribution box and fuses.
On the plastic cover there is a 24V socket.

Fuse boxes in main switchbox

The figure shows the position of the fuses.
The table below gives fuse amperage and function. All
fuses are flat pin fuses, type C (medium).
5A 5A Power group 3, Main ECU (F1.5) Power group 3, Main ECU (F1.5)
5. 5.
5A 5A Power group 4, Main ECU (F1.6) Power group 4, Main ECU (F1.6)
6. 6.
10A 10A 24V outlet, Lighting for tachograph (F1.7) 24V outlet, Lighting for tachograph (F1.7)
7. 7.
10A 10A Accessory ECU (F1.8) Accessory ECU (F1.8)
8. 8.
5. 5.
10A 10A Process lightning (F2.6) Process lightning (F2.6)
6. 6.
Driving lights (turn signals) (F2.7) Driving lights (turn signals) (F2.7)
7. 7.
Driving lights (main.) (F2.8) Driving lights (main.) (F2.8)
8. 8.
4812159701_D.pdf
Machine description
2021-03-16
20A 20A
20A 20A
10A 10A
20A 20A
15A 15A
7.5A 7.5A
10A 10A