Rops; Identification; Product And Component Plates - Fayat Group DYNAPAC CC224C Instruction Manual

2
3
1. 1. Product plate - Product Identification Number (PIN), model/type designation Product plate - Product Identification Number (PIN), model/type designation
2. 2. Engine plate - Type description, product and serial numbers Engine plate - Type description, product and serial numbers
3. 3. Cab/ROPS plate - Certification, product and serial numbers Cab/ROPS plate - Certification, product and serial numbers
4. 4. Component plate, drum - Product and serial numbers Component plate, drum - Product and serial numbers
2021-03-16
rear cab window, which can be broken with the
emergency hammer located in the cab.

ROPS

ROPS is the abbreviation for "Roll Over Protective
Structure".
The cab is approved as a protective cab in accordance
with the ROPS standard.
If any part of the cab's or the ROPS structure's
protective construction displays plastic deformation or
cracks, the cab or the ROPS structure must be
replaced immediately.
Never perform any modifications on the cab or ROPS
structure without first having discussed the
modification with Dynapac's production unit. Dynapac
determines whether the modification could result in the
approval according to the ROPS standard becoming
invalid.

Identification

Product and component plates

4
4812159701_D.pdf
Machine description
1, 2
4
25