12
High pressure cleaning
Do not spray directly onto electrical components.
Do not use high pressure cleaning for
Do not use high pressure cleaning for
dashboard/display.
dashboard/display.
The Electrical Drive Control and the computer
The Electrical Drive Control and the computer
box may not be washed with high pressure
box may not be washed with high pressure
cleaning and not at all with water. Clean them
cleaning and not at all with water. Clean them
with a dry wiper.
with a dry wiper.
Detergent that can destroy electrical parts, or
Detergent that can destroy electrical parts, or
which is conductive, must not be used.
which is conductive, must not be used.
Place a plastic bag over the fuel filler cap and secure
with a rubber band. This is to avoid high pressure
water entering the vent hole in the filler cap. This could
cause malfunctions, such as the blocking of filters.
Never aim the water jet directly at the fuel tank
Never aim the water jet directly at the fuel tank
cap, or into exhaust pipe. This is particularly
cap, or into exhaust pipe. This is particularly
important when using a high-pressure cleaner.
important when using a high-pressure cleaner.
Fire fighting
If the machine catches fire, use an ABC-class powder
fire extinguisher.
A BE-class carbon dioxide fire extinguisher can also
be used.
Roll Over Protective Structure (ROPS), ROPS
approved cab
If the machine is fitted with a Roll Over
If the machine is fitted with a Roll Over
Protective Structure (ROPS, or ROPS approved
Protective Structure (ROPS, or ROPS approved
cab) never carry out any welding or drilling in
cab) never carry out any welding or drilling in
the structure or cab.
the structure or cab.
Never attempt to repair a damaged ROPS
Never attempt to repair a damaged ROPS
structure or ROPS structure in cab. These must
structure or ROPS structure in cab. These must
be replaced with new ROPS structure or new
be replaced with new ROPS structure or new
cab.
cab.
Battery handling
When removing batteries, always disconnect the
When removing batteries, always disconnect the
negative cable first.
negative cable first.
4812159701_D.pdf
Special instructions
2021-03-16