2
3
1
5
Fig. Operator position
1. Seat belt
2. Safety railing
3. Locking knob
4. Rubber element
5. Anti-slip
Fig. View
64
Operator position
If a ROPS (Roll Over Protective Structure) or a cab is
fitted to the roller, always wear the seat belt (1)
provided and wear a protective helmet.
2
3
4
Release the locking knob (3), set the the railings in the
required position and relock in position.
View
Before starting, make sure that the view forwards and
backwards is unobstructed.
All cab windows should be clean and the rear view
mirrors should be correctly adjusted.
4812159701_D.pdf
Replace the seat belt (1) if it shows signs of
Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of
wear or has been subjected to high levels of
force.
force.
The safety rails (2) around the cab are adjustable
The safety rails (2) around the cab are adjustable
in the inner and the outer positions. Pull in the
in the inner and the outer positions. Pull in the
rails when driving close to walls or other
rails when driving close to walls or other
obstacles, and when transporting the machine.
obstacles, and when transporting the machine.
Check that the rubber elements (4) on the
Check that the rubber elements (4) on the
platform are intact. Worn elements will reduce
platform are intact. Worn elements will reduce
comfort.
comfort.
Ensure that the anti-slip (5) on the platform is in
Ensure that the anti-slip (5) on the platform is in
good condition. Replace where anti-slip friction is
good condition. Replace where anti-slip friction is
poor.
poor.
If the machine is fitted with a cab, make sure that
If the machine is fitted with a cab, make sure that
the door is closed when in motion.
the door is closed when in motion.
Operation
2021-03-16