Function Descriptions - Fayat Group DYNAPAC CC224C Instruction Manual

Figure. Steering column switch
(optional)
4
5
3
1
2
No No Designation Designation
1 1 Ignition key Ignition key
2 2 Forward/Reverse lever Forward/Reverse lever
6 6 Button set Button set
7 7 Central warning indication Central warning indication
8 8 Direction indicators Direction indicators
9 9 Main beam indicator Main beam indicator
10 10 Amplitude selector, high Amplitude selector, high
amplitude amplitude
34
Functions Functions
1. 1. Direction indicators Direction indicators
2. 2. Driving lights Driving lights
3. 3. Full/Dipped beam Full/Dipped beam
4. 4. Parking lights Parking lights
5. 5. Horn Horn

Function descriptions

Symbol Symbol Function Function
The electric circuit is broken. The electric circuit is broken.
All instruments and electric controls are supplied with power. All instruments and electric controls are supplied with power.
Starter motor activation. Starter motor activation.
To start: Turn ignition key to the right until the display To start: Turn ignition key to the right until the display
LIGHTS UP, and wait until the displayed roller GOES OFF LIGHTS UP, and wait until the displayed roller GOES OFF
and changes to the status image. and changes to the status image.
NOTE: The lever must be in neutral to start the machine. The NOTE: The lever must be in neutral to start the machine. The
engine will not start if the lever is in any other position. engine will not start if the lever is in any other position.
The direction and speed are controlled with the The direction and speed are controlled with the
forward/reverse lever. Moving the lever forward moves the forward/reverse lever. Moving the lever forward moves the
roller forward, and moving it back moves the roller back. roller forward, and moving it back moves the roller back.
The speed of the roller is proportional to the distance of the The speed of the roller is proportional to the distance of the
lever from neutral. The further the lever is from neutral, the lever from neutral. The further the lever is from neutral, the
higher the speed. higher the speed.
General fault indication. See display (33) for fault description. General fault indication. See display (33) for fault description.
Shows direction indicators activated (Activated via the Shows direction indicators activated (Activated via the
steering column switch). steering column switch).
Shows main beam activated (Activated via the steering Shows main beam activated (Activated via the steering
column switch). column switch).
Activation produces high amplitude. (Low amplitude is the Activation produces high amplitude. (Low amplitude is the
basic mode if the button is not activated.) basic mode if the button is not activated.)
4812159701_D.pdf
Machine description
2021-03-16