Fayat Group DYNAPAC CC224C Instruction Manual page 80

4
5
4. Manual sprinkling
5. Auto sprinkling (AWC)
1
Fig. Control panel
1. Gear position switch
2. Forward/Reverse lever
Fig. The display shows the selection in
the middle (position 1, 2 or 3)
68
When compacting asphalt, remember to turn on the
sprinkler system (4) or (5).
The watering of the combination wheels can be
activated from the emulsion tank.
Push and hold pressed the button for the wheel
sprinklers to water the tires.
Machine with gear change in separate
spring-return switch (gear position switch)
Switch (1) is a spring-return gear position switch,
2
where gear changing take place by stepping through
the three different gear positions: Position 1, Position 2
and Position 3.
• Position 1: Used for maximum hill-climbing capacity
during vibratory compaction
• Position 2: Normal position
• Position 3: Used for maximum transport speed or for high
speed during smooth rolling without vibration
4812159701_D.pdf
Make sure that the area in front of and behind the Make sure that the area in front of and behind the
roller is clear. roller is clear.
Release the parking brake (2). Release the parking brake (2).
Operation
2021-03-16