Burnout Of Dpf-Filter (Regeneration) - (Stage V); Dpf Displays - Fayat Group DYNAPAC CC224C Instruction Manual

3, 4
1
3
Fig. Control panel
1. Lamp
3. High exhaust temperature
4. Delayed burnout
Display symbol Display symbol
2021-03-16

Burnout of DPF-filter (Regeneration) - (stage V)

The machine is equipped with a diesel particle filter
(DPF filter), and the engine performs an automatic
burnout of soot and ash if necessary.
The burnout is performed after 6-10 hours of
operation, depending on the operating mode.
When burnout starts, the yellow warning indication (1)
lights continuously and then goes out after 2 min.
The burnout of the DPF filter lasts for approx. 30
minutes, and the machine can be operated as normal
or be allowed to idle during this time.
An image indicating high exhaust temperature (3) is
displayed when burnout starts (pop-up), and goes out
after 10 seconds. An indication (3) in the display's
status field is shown throughout the period when the
engine is performing burnout.
If it is not appropriate to allow the machine to perform
automatic burnout, perhaps because the machine is in
an unsuitable location or the prevailing working
conditions do not permit this, it is possible to delay
burnout by activating delayed burnout.
Selection for delaying burnout is in the menu "Machine
settings - EAT cleaning" on the display and delays
filter burnout for 20 minutes.
4
An image indicating delayed burnout (4) is now
instead shown in the display picture.

DPF displays

Sound Sound Soot Soot
level level
Beep Beep <100% <100%
100% - 100% -
<114% <114%
>100% >100%
4812159701_D.pdf
Comment Comment
Delayed burnout selected, to delay burnout by Delayed burnout selected, to delay burnout by
20 min. 20 min.
Deactivated automatically when the machine Deactivated automatically when the machine
is restarted. is restarted.
This view appears after an active selection in This view appears after an active selection in
the display screen. the display screen.
Operation
"Yellow "Yellow
warning" warning"
- -
0.5Hz 0.5Hz
71