2
Fig. Oil level check - drum gear
1. Level plug
2. Filling plug
2
Fig. Wheel gear
1. Drain plug
2. Ventilating plug
136
Drum gear - Checking the oil level
Move the machine until the inspection/filling holes are
in position for filling.
2
1
1
Refill with new oil. Use transmission oil according to
the lubricant specification.
Ensure that the oil level reaches up to the lower edge
of the plug hole.
Clean and refit the plugs.
Wheel gear - Oil change
Place the roller on a level surface. Move the machine
until the drain/breathing holes are in position for filling.
Wipe clean, unscrew the plugs (1, 2) and drain the oil
into a suitable receptacle, capacity about 2 liters (0.5
gal.).
2
1
4812159701_D.pdf
Maintenance - 1000h
Fig. Drum gear
1
Fig. Wheel gear
2021-03-16