Table of Contents
Advertisement
2
Figure. Drying filter
1. Sight glass
2. Filter holder
2
1
Figure. Two grease points for
lubricating the edge cutter
128
Air conditioning (Optional)
Drying filter - Inspection
With the unit in operation, check using the sight glass
(1) that bubbles are not visible on the drying filter.
1
The filter is placed at the top of the rear part of the cab
roof.
If bubbles are visible through the sight glass, this
indicates that the refrigerant level is too low. Stop the
unit to avoid risking damage. Fill up with refrigerant.
Edge cutter (Optional)
- Lubrication
Grease the two points as shown in the figure.
Grease should always be used for lubrication, see the
lubricant specifications.
Grease all bearing points with five strokes of a
hand-operated grease gun.
4812159701_D.pdf
Maintenance measures - 500 h
Park the roller on a level surface, chock the wheels
Park the roller on a level surface, chock the wheels
and activate the parking brake.
and activate the parking brake.
The refrigerant circuit is only to be worked on by
The refrigerant circuit is only to be worked on by
authorized companies.
authorized companies.
Refer to the operation section for information on
Refer to the operation section for information on
how to operate the edge cutter.
how to operate the edge cutter.
2021-03-16
Advertisement
Table of Contents
