Change The Engine Oil - Fayat Group BOMAG BT 60 Operating Instructions Manual

Maintenance every m onth

5.9 Change the engine oil

Danger
!
Danger of scalding when draining off hot en-
gine oil.
Caution
!
Park the machine on level ground.
Drain the engine oil only when the engine is
warm.
Check the engine oil level with highest care, to
avoid over or underfilling of the engine. Under-
filling or overfilling can damage the engine.
The engine cannot be started if the engine oil
level is too low.
For quality and quantity of oil refer to the "table
of fuels and lubricants".
Environment
Catch running out old oil, do not let it seep into
the ground and dispose off environmentally.
1
2
Fig. 33
Clean the area around oil dipstick (1) (Fig. 33)
l
and drain plug (2).
Unscrew the oil dipstick .
l
Unscrew the oil drain plug , let the old oil run
l
out and catch it.
Clean the drain plug and screw it back in with
l
a new seal ring.
Fill in fresh engine oil through the oil filler
l
opening .
BT 60 / BT 65
541022
Fig. 34
The oil level must reach the bottom edge of the
l
filler bore (Fig. 34), top up if necessary.
Push the oil dipstick (1) back in.
l
Perform a test run, inspect the drain plug for
l
leaks and check the oil level.
541017
B O M A G
M a i n t e n a n c e e v e r y m o n t h
MAX
MIN
3 9