Wheel Scrapers Control - Adjustment - Fayat Group DYNAPAC CC224C Instruction Manual

Fig. Wheel scrapers
1. Scraper blades
2. Locking hook
3. Adjusting screw
1
Fig. Wheel scrapers
1. Scraper blades
2. Locking hook
110
Wheel scrapers
Control - Adjustment
Make sure that the scrapers are undamaged. Adjust
the scrapers so that they are 1-2 mm from the tires.
For special asphalt compounds it can be better if the
scraper blades (1) are only in light contact with the
3
tires. The contact is adjusted with the screw on the
back of the scraper bracket.
2
1
1-2 mm
The scrapers must hang free from the tires during
transportation.
2
Lift up the scraper blades (1) and make sure that they
are locked in raised position by the looking hooks.
To lower down the scrapers, lift the scraper slightly
while pressing in the locking hook.
4812159701_D.pdf
Maintenance, 10h
2021-03-16