Setting Up The Network Address Book - Xerox WorkCentre 6605 User Manual

Setting Up the Network Address Book

Before you can use the Network Address Book, configure the printer to communicate with the LDAP
server.
To set up the Network Address Book:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. Click Properties.
In the left navigation panel, scroll to Protocols, then select LDAP Server.
3.
4. Next to IP Address/Host Name & Port, enter the IP address or DNS name for the LDAP server, then
enter the port number for LDAP.
Note: If the optional hard drive is installed and the HDD Data Encryption is enabled, the settings for
the LDAP-SSL/TLS appear. Ensure that you save all changes on the LDAP Server page before clicking
the SSL link to enable LDAP-SSL/TLS.
5. Enter the Search Directory Root.
6. Enter a valid login name and password.
7. Select one or more of the following:
− To enable the Network Address Book for the Scan to Email service, select Server Email Address
Book.
− To enable the Network Address Book for the fax service, select Server Fax Address Book.
Click Save Changes.
8.
9. At the prompt to restart the system, click Restart.
® ®
Xerox WorkCentre 6605 Color Multifunction Printer
Installation and Setup
55
User Guide