Hardware Installation and Reference Guide
(6)
Move the switch with both hands onto the shipping box of another product, and remove the foam on the other
side.
(7) Remove the tape on the
two sides of the chassis, lift the switch out of the static-shielding container, and place it on an antistatic
workbench.
Figure 2-7
(8) Press the power module inward to ensure that the power module is fully seated into the system.
3
Installing the Switch
Make sure that guidelines and requirements in chapter 2 have been met before you begin the installation. Plan
for the installation site, networking mode, power supply, and cabling in advance.
static-shielding
container, open and reach into the bag with both hands, grab the
35
Installing the Switch
Need help?
Do you have a question about the RG-S6510-4C and is the answer not in the manual?