Tools - Ruijie RG-S6510-4C Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Figure 2-2 19-Inch Rack
(1) Use a four-post 19-inch EIA rack.
(2) The left and right square hole rack posts are 465 mm (18.31 in.) apart.
(3) The square hole rack post is at least 180 mm (7.09 in.) from the front door, and the front door is at most 25
mm (0.98 in.) thick. This ensures an available clearance of at least 155 mm (6.10 in.). The rack depth
(distance between front and rear doors) is at least 1,000 mm (39.37 in.).
(4) The guide rails or tray can bear the weight of the chassis and its components.
(5) The rack has a reliable grounding terminal for the chassis to connect to earth ground.
(6) The rack has a reliable heat dissipation system. The open area of front and rear doors is greater than 50%.
2.4

Tools

Table 2-3 Tools
Tools
Common tools
Dedicated tools
Note
The tool kit does not come with the equipment.
Description
Philips screwdriver, utility knife, adjustable wrench, ESD-preventive clothing
ESD-preventive wrist strap, ESD-preventive glove, marker, cage nuts, screws,
cables, and cable ties
32
Preparing for Installation