Powering On The Device; Checklist Before Power-On - Ruijie RG-S6510-4C Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
b Click Serial in the left column.
bits to 1, and Flow control to None.
c Click Open to set up the connection.
(4) After setting up the configuration environment, power on the device. If the device is already configured with
a password, a notification will appear. Click Accept, and enter your username and password for connection.
4.2

Powering on the Device

4.2.1

Checklist Before Power-on


The switch is connected to earth ground.

The fan and power modules are properly installed.

The power cord matching the power module is connected properly.

The input voltage follows the requirement.
Set Bits per second to 115,200, Data bits to 8, Parity to None, Stop
52
Commissioning